Review Inspection Report

To check an inspection :
1. Click on Menu >>Search.

2. Enter registration number of vehicle or select the required date range. 

3. Click on the desired inspection card from the search result to view the inspection report. 





Once the inspection is opened, "Inspection details" will be shown at the top as highlighted. Inspection report can be downloaded or shared under “Inspection report” section.

Specific sections can be selected to be shared, as per this article.

Vehicle details include,

> Registration number

> VIN number

> Make

> Model

> Variant

> Customer details

Vehicle images can be viewed in detail by clicking on images under “Analyzed” section.

Overview gives an idea about the different damaged sections of the vehicle.

Eg –In the following image, damages are detected on “Left rear” and “Rear” sections of the vehicle.

Red icon - Damaged panel

Green icon - Clean panel

Orange icon - Part not found in inspection

Select each section to view specific parts and damages found. In the following image, “Left Rear” section is selected to view the damages detected there.

Select relevant filters to view the following categories:

1. Damaged Part
2. Clean – Panels that don’t have any damages in the current inspection.
3. Unrecognized – Panels that are not detected/captured in the current inspection.

Click on image thumbnails or icons on the overlays to view the damages. Raw and analyzed images will be shown side by side for convenience. Damage type will be displayed at the top of the pop-up.

Tyre and wheel details can be found in the "Tyre" section. Tyre details such as Brand, Model etc are shown under "Info" tab when tyre images are captured during inspection. Damages if any, can be found in the "Damages" tab.

Inspection checklist will be displayed below. If the inspector had added any notes and images along with checklist items, it will be shown under "Notes" and "Images" sections.